RO water purifier: A Water Purification System For Soft Water

RO water purifier: A Water Purification System For Soft Water

Water purification is something that has become part and parcel of our life. Throughout the years, the pollution of water is a matter of concern. Therefore, we must stay vigilant and fight against polluted water.

Each day, the hazardous materials of factories and ship wastes are polluting our water. Moreover, in the source waters, such as lakes, rivers, and other sources, we find the pollution level quite high. Therefore it has become a necessity for us to install a water purification system in our household.

Our body is of utmost importance.  Therefore, we need to consume pollution and contamination-free water to strengthen our bodies and keep our immunity system perfectly up for its job. It’s not unknown that each cell of our body requires water to survive. Therefore, we need to consume plenty of purified water.

But did you know that consuming hard water can cause a lot of diseases? Well alone it may not invite diseases; however, if there’s a lot of salt dissolved in it, then it can cause a real blow to our health.

So before we talk about hard water, we need to know about some of the important contaminants of water.

Some Dangerous Contaminants Of Water

Our source water can cause a lot of diseases if it doesnā€™t get purified. So letā€™s talk about those contaminants.

So, in general, we have three sources, namely, Groundwater, Municipality water, and Borewell water. Generally, municipality water contains a lot of dangerous bacteria and viruses. Moreover, it also contains hazardous chemical pollutants. In addition, if your source pipe is old and rusty, the chances are that your water may contain hard particles, rusts, and other suspended solids.

Groundwater, too, has a lot of excessive minerals, which can be detrimental to health. We know that water contains essential minerals. However, if it comes in excess, then it can have serious repercussions on our bodies. So, groundwater contains a lot of contaminants which can cause a lot of health problems.

Another source is borewell. However, borewell water can be dangerous to consume if thereā€™s a high TDS level.

TDS or Total Dissolved Solids

Total dissolved solids are very dangerous because they cannot be purified through normal boiling means. Therefore you need a good quality purifier to get rid of those.

The TDS level of water is measured by parts per million. If source water has over a 500ppm level of TDS, it can be hazardous for our health. Moreover, municipal water can contain 150ppm levels of dissolved solids.

A Note On Hard Water

We can classify water as hard and soft water. Moreover, it is based on the amount of TDS contained in the water. If the amount of total dissolved solids is higher, then you can consider it hard water. While, if the TDS level is less, then it is considered soft water.

Ways To Make Soft Water

A good water purifier can be used as a water softener. We all know that a high amount of calcium and magnesium can cause the hardness of the water. Therefore, a water softener can remove the minerals from water through the process of ion exchange.

Moreover, these softeners also have polystyrene beads. Those are charged with the ions of sodium chloride. So, when hard water passes through those beads, the minerals and the sodium change their position; therefore, it filters the water from those excess minerals.

Furthermore, if the hardness of the water is too much, then you can use a good quality water purifier to contain and make the water soft and better for consumption. If the TDS of the water exceeds 500ppm, then itā€™s advisable to get a water purifier service to purify the water. Otherwise, the consumption of water can cause a lot of health problems.

How To Make Drinkable Soft Water?

As we said earlier, if the hardness is on a larger scale ( <500ppm), then you can use a good quality water purifier, and for this contact the RO service provider. Moreover, it acts as a softener. An RO water purifier uses the opposite process of Osmosis.

Itā€™s great to filter out the total dissolved solids through its RO membraneā€™s semi-permeable pores. It offers you sodium-free water, which adds a good taste to the water and overall makes the quality great for consumption.

These are some of the components through which an RO water purifier purifies water.

1. Sediment Pre-filter 

The sediment prefilter is the first stage of purification. This pre-filter removes all the suspended solids, slits, hard particles, and other sand, dust, etc. 

2. Carbon Pre-filter 

This filter helps to get rid of excess chlorine and also kills harmful pesticides. Moreover, it also absorbs bad odor from water.Ā 

3. RO Membrane 

This is the main filter through which total dissolved solids are filtered. An RO membrane removes the hardness, kills microorganisms, and blocks heavy metals. This filter uses very thin semi-permeable pores and blocks minute impurities.

4. UV Filter 

Some RO water purifiers also come with UV filters. UV filters use ultraviolet rays to kill viruses and bacteria, therefore providing us with completely safe and pure water to drink.

5. Carbon Post-Filter

This filter acts as a polisher. Moreover, it also enhances the waterā€™s overall quality and adds a nice taste to it. It also gets rid of foul smells from the water. 

Final Thoughts

Consuming hard water is very dangerous. Therefore we need to soften the water using appropriate means. Installing an RO water purifier can be effective in dealing with higher TDS and hard water levels. Moreover, we ensure the safety of our health by drinking pure and clean soft water. 

Was this helpful?

1 / 0

Leave a Reply 0

Your email address will not be published. Required fields are marked *